El libre pensamiento para un internet libre
No estas registrado.
Good morning,
sorry but I do not have much experience of these things.
I bought a router ALFA NETWORK AIP-W525H V2 and positioned on the outside of my house (to handle some cameras IPCam).
Originally there were two antennas 5dbi I replaced with two antennas 9 dBi.
The wifi signal is improved slightly.
I would like to increase the output power as I have seen done here.
It is a Realtek RTL8196C.
I saw that with Telnet and user: Root and Password: 5up can access the system.
The commands used in the post "Aumentar la potencia en salida de nuestro dispositivo WiFi" of 12/2/2016 do not work, such as iwconfig become ipconfig ....
What commands can I use?
Does anyone know how to increase the wireless signal strength?
Thanks in advance
Davide
Buenos días,
Lo siento pero no tengo mucha experiencia de estas cosas.Compré un router ALFA NETWORK AIP-W525H V2 y colocado en el exterior de mi casa (para manejar algunas cámaras IPCam).
Originalmente había dos antenas 5dbi que reemplazé con dos antenas de 9 dBi.
La señal wifi se mejora ligeramente.Me gustaría aumentar el poder de salida como he visto hecho aquí.
Es un Realtek RTL8196C.
Vi que con Telnet y el usuario: Root y contraseña: 5up puede acceder al sistema.Los comandos utilizados en el mensaje "Aumentar la potencia en salida de nuestro dispositivo WiFi" de 12/2/2016 no funcionan, como iwconfig convertido en ipconfig ....
¿Qué comandos puedo usar?
¿Alguien sabe cómo aumentar la potencia de la señal inalámbrica?
Gracias por adelantado
Davide
Desconectado
Bienvenido
Un sistema operativo GNU-Linux (ubuntu, kali etc...) es diferente del firmware que te pone Alfa network.
No puedes usar iwconfig
Puedes usar la opción de la pagina de la interfaz:
Para poder usar comandos como iwconfig deberías instalar LEDE o OpenWRT (un firmware Open Source)
Welcome!
The firmware from Alfa network is not a GNU-Linux distibution and you cannot use the iwconfig command
You can use the dedicated option (see picture above)
If you want to use this kind of command you need to install an Open source firmware such as OpenWRT or LEDE.
Desconectado
thanks,
the parameter "RF Output Power" is already to 100%.
And router ALFA NETWORK AIP-W525H V2 is not in hardware list
supported bye LEDE or OpenWRT or DD-WRT.
I was hoping someone had some other system..
Thanks kcdtv.
Gracias,
El parámetro "Potencia de salida RF" ya está al 100%.
Y el router ALFA NETWORK AIP-W525H V2 no está en la lista de hardware
Soportado bye LEDE o OpenWRT o DD-WRT.
Esperaba que alguien tuviera algún otro sistema.
Gracias kcdtv.
Desconectado
El parámetro "Potencia de salida RF" ya está al 100%.
El router no está limitado por su configuración CRDA y entonces tienes la potencia máxima.
Y el router ALFA NETWORK AIP-W525H V2 no está en la lista de hardware
Soportado bye LEDE o OpenWRT o DD-WRT.
Esperaba que alguien tuviera algún otro sistema.
No veo otra alternativa que quedarte con el firmware de origén...
With 100% you use all the power (router is not CRDA limited) and I unfortunately don't know any other alternative solution
Desconectado
Tema | Respuestas | Vistas | Ultimo mensaje |
---|---|---|---|
Pegado:
Pegado:: Pixiewps de wiire : la herramienta para el novedoso ataque Pixie Dust. por kcdtv [ 1 2 3 4 ]
|
87 | 43234 | Ayer 23:35:14 por Preston |
Pegado: |
149 | 10981 | Ayer 21:59:57 por katus |
La travesia del AP AC homebrew por SirLouen
|
1 | 66 | 15-02-2019 21:51:59 por kcdtv |
Pegado: |
321 | 20631 | 15-02-2019 19:08:13 por Koala |
proyecto red con ac1200r como repetidor wifi por muglio
|
12 | 124 | 15-02-2019 11:59:33 por kcdtv |
Ultimo usuario registrado: UsernameEnrique
Usuarios registrados conectados: 0
Invitados conectados: 20
Número total de usuarios registrados: 1,387
Número total de temas: 1,265
Número total de mensajes: 13,018
Atom tema feed - Impulsado por FluxBB