El libre pensamiento para un internet libre
No estas registrado.
Hola muy buenas a todos, espero postear en el lugar indicado.
Resulta que estoy probando el ataque PMKID, puse la tarjeta en modo monitor, como pueden ver.
@kali:~/Escritorio/toolz$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11 Mode:Monitor Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:off
Cuando empiezo a capturar paquetes con este comando, resulta que parece esto:
@kali:~/Escritorio/toolz$ sudo hcxdumptool -i wlan0 -o captura.pcapng --enable_status=1
initialization...
interface is already in monitor mode
warning: interface is not up
start capturing (stop with ctrl+c)
NMEA 0183 SENTENCE........: N/A
INTERFACE NAME............: wlan0
INTERFACE HARDWARE MAC....: 4576aa5432356
DRIVER....................: rt2800usb
DRIVER VERSION............: 5.7.0-kali1-amd64
DRIVER FIRMWARE VERSION...: 0.36
ERRORMAX..................: 100 errors
BPF code blocks...........: 0
FILTERLIST ACCESS POINT...: 0 entries
FILTERLIST CLIENT.........: 0 entries
FILTERMODE................: unused
WEAK CANDIDATE............: 12345678
ESSID list................: 0 entries
ACCESS POINT (ROGUE)......: 843543543d9f (BROADCAST HIDDEN)
ACCESS POINT (ROGUE)......: 2dssddfereea0 (BROADCAST OPEN)
ACCESS POINT (ROGUE)......: 6dsfdt545fd35 (incremented on every new client)
CLIENT (ROGUE)............: d44fdgfdgfdsf
EAPOLTIMEOUT..............: 20000 usec
REPLAYCOUNT...............: 45876
ANONCE....................: ftrrth544sdfsdf54t454t54t4grtyhyththryth5y5grtggg5e343frfaassaryfgh74
SNONCE....................: r6567tggfhsdadasdsasa98s7dasf8g7fgdf8d7s5sa4as3ds45fd6gf7gf86565r
failed to read packet: Network is down
acá les dejo los datos de la tarjeta, no le he instalado ningún driver, la conecte al usb y la habilite. Es una RT2870/RT3070 marca genérica.
kali:~$ sudo lsusb
[sudo] password for lexic:
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[acronym]kali:~$ sudo lsusb -vv
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x148f Ralink Technology, Corp.
idProduct 0x3070 RT2870/RT3070 Wireless Adapter
bcdDevice 1.01
iManufacturer 1 (error)
iProduct 2 (error)
iSerial 3 (error)
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 450mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 7
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 (error)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get debug descriptor: Resource temporarily unavailable
cannot read device status, Resource temporarily unavailable (11)
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x80ee VirtualBox
idProduct 0x0021 USB Tablet
bcdDevice 1.00
iManufacturer 1 VirtualBox
iProduct 3 USB Tablet
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0022
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 85
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 5.07
iManufacturer 3 Linux 5.7.0-kali1-amd64 ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:06.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 12
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0103 power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0100 power
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered[/acronym]
Si alguien fuera tan amable de ayudarme se lo agradecería mucho, espero que el problema sea mala configuración y no de compatibilidad.
Saludos.
Ultima edición por Blasster00 (22-08-2020 03:28:50)
Desconectado
[email protected] @ wifi-libre!
spero que el problema sea mala configuración y no de compatibilidad.
No es un problema de compatibilidad: El rt3070 es totalmente compatible con Kali Linux (y otras distribuciones) con el modulo generico rt2800usb
No hace falta instalar nada
Parece que tu interfaz no esta activa:
warning: interface is not up
Veo que has activado el modo monitor sin usar airmon-ng ya que tu interfaz se llama wlan0 en lugar de wlan0mon.
El problema es que haciendo así tienes un conflicto con network-manager que guarda la mano sobre la interfaz wlan0
Lo mas simple para eludir los conflictos es activar el modo monitor con airmon-ng
airmon-ng start wlan0
Obtendrás así una nueva interfaz (llamada wlan0mon) 100% dedicada el modo monitor, sin conflictos con network-manager
Tendrás que lógicamente usar la interfaz wlan0mon en lugar de wlan0 tu linea de ordenes hcxdumptool
Conectado
kcdtv Gracias por responder.
Veo que has activado el modo monitor sin usar airmon-ng ya que tu interfaz se llama wlan0 en lugar de wlan0mon.
Efectivamente, la advertencia era por eso, pero ahora me salio otra advertencia
warning: wlan0mon is probably a virtual monitor interface
@kali:~/Escritorio/toolz$ sudo hcxdumptool -i wlan0 -o captura.pcapng --enable_status=1
initialization...
warning: wlan0mon is probably a virtual monitor interface
interface is already in monitor mode
start capturing (stop with ctrl+c)
NMEA 0183 SENTENCE........: N/A
INTERFACE NAME............: wlan0mon
INTERFACE HARDWARE MAC....: 4576aa5432356
DRIVER....................: rt2800usb
DRIVER VERSION............: 5.7.0-kali1-amd64
DRIVER FIRMWARE VERSION...: 0.36
ERRORMAX..................: 100 errors
BPF code blocks...........: 0
FILTERLIST ACCESS POINT...: 0 entries
FILTERLIST CLIENT.........: 0 entries
FILTERMODE................: unused
WEAK CANDIDATE............: 12345678
ESSID list................: 0 entries
ACCESS POINT (ROGUE)......: 843543543d9f (BROADCAST HIDDEN)
ACCESS POINT (ROGUE)......: 2dssddfereea0 (BROADCAST OPEN)
ACCESS POINT (ROGUE)......: 6dsfdt545fd35 (incremented on every new client)
CLIENT (ROGUE)............: d44fdgfdgfdsf
EAPOLTIMEOUT..............: 2000 usec
REPLAYCOUNT...............: 45876
ANONCE....................: ftrrth544sdfsdf54t454t54t4grtyhyththryth5y5grtggg5e343frfaassaryfgh74
SNONCE....................: r6567tggfhsdadasdsasa98s7dasf8g7fgdf8d7s5sa4as3ds45fd6gf7gf86565r
No inyecta, se queda en inicializando, van como 30 min y no pasa nada. En la configuración de red esta en NAT, no se si tendrá algo que ver esto.
Desconectado
En la configuración de red esta en NAT,
No res relevante.
Ahora no todos los PA tienen habilitados por defecto la PMKID.
Si no sale con una herramienta de terceros, haz las cosas a mano
Captura PMKID (y cadenas necesarias) con wpa_supplicant
Conectado
Ahora no todos los PA tienen habilitados por defecto la PMKID.
Genial, es bueno saber que no es mala configuración.
Si no sale con una herramienta de terceros, haz las cosas a mano
seguiré la guía, gracias.
Desconectado
Tema | Respuestas | Vistas | Ultimo mensaje |
---|---|---|---|
Error de inicio en entorno gráfico por Hunter310#
|
24 | 14984 | 20-06-2022 12:22:19 por kcdtv |
15 | 2712 | 10-06-2022 09:13:42 por kcdtv | |
0 | 210 | 02-06-2022 10:05:09 por kcdtv | |
TP-Link Backup Decryption Utility por kcdtv
|
0 | 200 | 31-05-2022 18:44:34 por kcdtv |
¡Aircrack-ng 1.7 ya está disponible! por kcdtv
|
1 | 514 | 13-05-2022 08:46:52 por Koala |
Ultimo usuario registrado: Asakuras
Usuarios registrados conectados: 2
Invitados conectados: 16
Número total de usuarios registrados: 2,317
Número total de temas: 1,587
Número total de mensajes: 15,137
Atom tema feed - Impulsado por FluxBB